[dzltek]

Ok, Ive got an R1 in a 400ex frame and cannot find a sprocket for it. It has a 48 tooth, but I would like to have a 56 or better. Question is, where do I get such a sproket and chain?? The quad was running good, then the trans. took a dump, and the shift detent broke on me. Got another trans in it, and figured since the engine was out of the frame, I'd clean and repaint it. I had the swing arm off cleaning the paint off and happened to look down and a chain link was between my feet. So, now after everything I've done I'm in need of a chain. So any help will be appreciated. Thanks.

[Fog]

dzltek, on 30 January 2012 - 06:04 PM, said:

Ok, Ive got an R1 in a 400ex frame and cannot find a sprocket for it. It has a 48 tooth, but I would like to have a 56 or better. Question is, where do I get such a sproket and chain?? The quad was running good, then the trans. took a dump, and the shift detent broke on me. Got another trans in it, and figured since the engine was out of the frame, I'd clean and repaint it. I had the swing arm off cleaning the paint off and happened to look down and a chain link was between my feet. So, now after everything I've done I'm in need of a chain. So any help will be appreciated. Thanks.

Sprocket Specialists or Sidewinder can build you anything you need

[THEBOM]

I have some 530's for the Honda pattern new on the self. I run that on my DS race bikes. I have some in the 50's but I'm not sure if I have a 56t or not.

[gatormontanye]

alex at side winder builds all of mine, go with a 530.
gator

[Borr1s1]

I agree.
Go with a 530 chain.
It is heavier, and a pain to get your sprockets cut, but you will nor be happy if you stay with 520.