Register Now!
Help
I just cut the pegs off my banshee went with the race peg bar setup I was wondering if there was a aluminum shifter that fit I was going to cut down my aluminum one but thats going to take a little work I could do the stock shifter but would rather have aluminum one thanks
Page 1 of 1
banshee race peg shifter
#2
- Pin it to win it
-
- Group: Site Staff!
- Posts: 1806
- Joined: 13-September 08
- Gender:Male
- Location:Spring Hill,Ks
- Interests:Hunting,ridin, Lake of the Ozarks and hangin with my wife and kids
Posted 07 February 2012 - 08:01 PM
Ron there is an adjustable one a lotta guys use it has an end that is adjustable. I think its the trick licks one.
Until the sand flies.....your just blowin smoke.
#3
- 1/4 THROTTLE
-
- Group: Lifetime Site Supporter!
- Posts: 457
- Joined: 15-May 08
- Gender:Male
- Location:Kansas City, Mo
Posted 08 February 2012 - 08:26 AM
I think a lot of them make short shifters. I just checked ebay and found a few -1" but it seems when
I did it I had to have a -2" shifter. I was able to buy one off ebay but that was a few years back.
I did it I had to have a -2" shifter. I was able to buy one off ebay but that was a few years back.
Pure Luck Racing
#4
- 3/4 THROTTLE
-
- Group: MEMBERS
- Posts: 751
- Joined: 19-October 08
- Gender:Male
- Location:Two Stroke Central, Arkansas
Posted 09 February 2012 - 10:41 AM
I have a -1 on my stock frame drag bike. I have had to cut down and weld a stocker for 2 different chassis style bikes.
Just for info, all of the small Honda style 50,70,90 motors as well as all of the chinese copies have the same spline as the Banshee. I have used one of those before and modded it. As a matter of fact I bent a Banshee shifter and used it on Dana's ATC70. lol
Just for info, all of the small Honda style 50,70,90 motors as well as all of the chinese copies have the same spline as the Banshee. I have used one of those before and modded it. As a matter of fact I bent a Banshee shifter and used it on Dana's ATC70. lol
slow 421 dragger, duner banshee, 310R duner
Wife's 370R Fastest true gas Pro-X Honda 4.29 in sand 4.17 in dirt 300ft on a dune chassis.
2-cycle generator and an old school Lawnboy to mow the yard!
It aint no joke if it blows blue smoke
Wife's 370R Fastest true gas Pro-X Honda 4.29 in sand 4.17 in dirt 300ft on a dune chassis.
2-cycle generator and an old school Lawnboy to mow the yard!
It aint no joke if it blows blue smoke
#5
- Idle
-
- Group: MEMBERS
- Posts: 55
- Joined: 19-April 10
Posted 10 February 2012 - 09:22 AM
do you have pics of your race pegs you are running? i am in the process of modifying a stock banshee frame and lightening it up, but i wasn't sure what to do with the pegs.
#6
- Idle
-
- Group: MEMBERS
- Posts: 113
- Joined: 26-January 09
Posted 10 February 2012 - 07:51 PM
thanks guys ill check the 70 shifter might just cut down the stock one
I can post some pics tomorrow but all I did was cut the factory foot peg mounts off and welded in some 1 inch .65 wall stainless easy to do just takes a little time and lot of grinding
I can post some pics tomorrow but all I did was cut the factory foot peg mounts off and welded in some 1 inch .65 wall stainless easy to do just takes a little time and lot of grinding
#8
- Pin it to win it
-
- Group: Site Staff!
- Posts: 1806
- Joined: 13-September 08
- Gender:Male
- Location:Spring Hill,Ks
- Interests:Hunting,ridin, Lake of the Ozarks and hangin with my wife and kids
Posted 12 February 2012 - 08:16 AM
Ron, I think top1banshee uses blaster shifters and said its 1" shorter than a banshee I believe. You can holler at him. He a new cell number.
Until the sand flies.....your just blowin smoke.
Share this topic:
Page 1 of 1
