ATV Drag Racers: what clutch basket to run - ATV Drag Racers

Jump to content
Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

what clutch basket to run on a 4 mill dm

#1 User is offline   banshee(911) 

  • 1/2 THROTTLE
  • PipPipPip
  • Group: MEMBERS
  • Posts: 685
  • Joined: 12-June 08
  • Gender:Male
  • Location:adirondacks newyork

Posted 09 January 2012 - 05:44 PM

Like it says..i had some issues last year running my bike.it would creep after a couple passes then the bike wouldnt sit at the light(wanted to launch with the clutch pulled) it has a billet basket but stock number of plates with an extra steel.
Thanx Ray
a lil 4 mill DM on alky built by no other (Nate Mccoy)sitting in an ohton chassie with a 89 inch wheel base!!
0

#2 User is offline   2001Stroker 

  • 1/4 THROTTLE
  • PipPip
  • Group: MEMBERS
  • Posts: 412
  • Joined: 17-May 08
  • Gender:Male
  • Location:Chesapeake, Va.

Posted 09 January 2012 - 06:34 PM

What oil you use? I had that problem with gear oil, but completely went away with ATF Type-F.

Sent from my DROIDX using Tapatalk
0

#3 User is offline   banshee(911) 

  • 1/2 THROTTLE
  • PipPipPip
  • Group: MEMBERS
  • Posts: 685
  • Joined: 12-June 08
  • Gender:Male
  • Location:adirondacks newyork

Posted 09 January 2012 - 07:19 PM

View Post2001Stroker, on 09 January 2012 - 06:34 PM, said:

What oil you use? I had that problem with gear oil, but completely went away with ATF Type-F.

Sent from my DROIDX using Tapatalk

Thats what im running...atf type f
a lil 4 mill DM on alky built by no other (Nate Mccoy)sitting in an ohton chassie with a 89 inch wheel base!!
0

#4 User is offline   Diablo 

  • Idle
  • Pip
  • Group: MEMBERS
  • Posts: 52
  • Joined: 05-September 10
  • Gender:Male
  • Location:Yuma, Arizona
  • Interests:Just playin in the sand.

Posted 09 January 2012 - 10:34 PM

You might want to make sure your clutch disks are not warped. My bike had the exact same problem.
LT-500R
LT-250R
0

#5 User is offline   banshee(911) 

  • 1/2 THROTTLE
  • PipPipPip
  • Group: MEMBERS
  • Posts: 685
  • Joined: 12-June 08
  • Gender:Male
  • Location:adirondacks newyork

Posted 10 January 2012 - 07:20 PM

Thanx fellas ive got a few things to try!
a lil 4 mill DM on alky built by no other (Nate Mccoy)sitting in an ohton chassie with a 89 inch wheel base!!
0

#6 User is offline   camatv 

  • heavyweight jockey
  • PipPipPipPipPip
  • Group: MEMBERS
  • Posts: 1521
  • Joined: 20-May 08
  • Gender:Male
  • Location:hutch kansas

Posted 11 January 2012 - 11:04 PM

are you trying to stagger the springs..?

also probably need a new clutch, make sure its adjusted, new cable and lube it, use longer lever for more pull and make sure your stuff on your bars is not in the way of pulling in the lever big [censored] grips trim them down so you can disengage farther.

i run 10-30 to 10-40 mc specific oil mostly castrol 4T or hondaline.
unless i'm writing a BOOK and YOUR paying me i dont have to tell you nothin
0

Share this topic:


Page 1 of 1
  • You cannot start a new topic
  • You cannot reply to this topic

1 User(s) are reading this topic
0 members, 1 guests, 0 anonymous users


Skin and Language

Execution Stats

  • Time Now: May 18 2012 11:41 AM