Dome Valley, AZ.
#1
Posted 07 November 2011 - 05:55 PM
Looks like I'll be sticking with the asphalt!
#2
Posted 08 November 2011 - 10:51 AM
1700camaro, on 07 November 2011 - 05:55 PM, said:
Looks like I'll be sticking with the asphalt!
Any idea why it got cancelled?
* FULLERTON SAND SPORTS TIRES & WHEELS
* FLORENCE YAMAHA/POLARIS (Pacific Northwest)
* ONE INDUSTRIES/SIXSIXONE/TAG METALS
* K&N FILTERS
Facebook: Gary ("Gee") Armstrong Racing
#3
Posted 08 November 2011 - 11:27 AM
thanks and pass the word around.
thanks again
Chuy
DOME VALLEY RACEWAY
www.domevalleyraceway.com
#4
Posted 08 November 2011 - 12:03 PM
chuy777, on 08 November 2011 - 11:27 AM, said:
thanks and pass the word around.
thanks again
Chuy
If Charlie is not involved, I'm more than willing to give it a try!
#5
Posted 08 November 2011 - 12:15 PM
based on the entry count, some classes may be cut out. sorry for the last minute notice. any questions, you can contact me at 480 628 0777
Race schedule
Friday
4:00pm–10:00pm Test and Tune
Saturday
7:30 Drivers Meeting
8:00-11:00 Qualifying Passes
Sports Bracket 11:30am
Youth
Sports Bike
Pro Bracket 1:00
7.00-4.50
4.49-Faster
Index Classes 3:00pm
5.00-4.50
4.49-4.00
3.99-3.75
3.74-3.50
Limited Classes 5:30pm
Single Cylinder Limited Heads Up (2 & 4 Strokes)
Twin Cylinder Limited Heads Up
Triple Cylinder Limited Heads Up
Four Cylinder Limited Heads Up
Unlimited Classes 7:30pm
Single Cylinder Limited Heads Up (2 & 4 Strokes)
Twin Cylinder Limited Heads Up
Triple Cylinder Limited Heads Up
Four Cylinder Limited Heads Up
DOME VALLEY RACEWAY
www.domevalleyraceway.com
#6
Posted 08 November 2011 - 12:35 PM
Bryan
#7
Posted 08 November 2011 - 12:37 PM
DOME VALLEY RACEWAY
www.domevalleyraceway.com
#9
Posted 08 November 2011 - 01:10 PM
chuy777, on 08 November 2011 - 12:37 PM, said:
Do we have to belong to any particular racing organization to race there?
I'm here in Yuma so I could pass the word to some locals.
LT-250R
#11
Posted 08 November 2011 - 01:16 PM
After charlie told me that he was not going to do the race, i posted on here, i know they are talking about me on planet sand, i have no issues with him, i just mentioned that we were still going to run an event this weekend for the racers even if it was not a planet sand event. no harm no foul.
best of luck to everyone
DOME VALLEY RACEWAY
www.domevalleyraceway.com
#12
Posted 08 November 2011 - 01:18 PM
7mm Cub on race gas, stock frame, +14 arm, +1 forward on a-arms, quad/rider 540 lbs.
22x11x8 12 paddle extremes, I have no choice!
We used 16/41 (2.56 ratio) on the hill, 1st gear launch (1-4 manual 5&6).
Right now I have it set-up for 17/42 (2.47 ratio) for a 300' baseline.
Clutch primary/base pressure is set between our asphalt set up and our hill set-up. Hill setting had too much base and I think the asphalt base would be too loose. Arm weights I'm keeping with the asphalt weight initially. Pretty sure I'll have to remove some weight.
Launch limiter set @ 10,000 & shift light @ 10,000 same as we use for 1/4 mile asphalt. Probably will have to lower the launch rpm some.
#13
Posted 08 November 2011 - 01:38 PM
#14
Posted 08 November 2011 - 01:56 PM
DOME VALLEY RACEWAY
www.domevalleyraceway.com
#15
Posted 08 November 2011 - 02:26 PM
LT-250R
#16
Posted 08 November 2011 - 02:34 PM
DOME VALLEY RACEWAY
www.domevalleyraceway.com
#18
Posted 09 November 2011 - 04:51 PM
#19
Posted 09 November 2011 - 05:15 PM
#20
Posted 09 November 2011 - 05:18 PM
Tate, on 08 November 2011 - 01:38 PM, said:
What do u go by over there Tate?

Register Now!
Help














